Ball-Bush Block Set 8 D14
0.0.629.16

Ball-Bush Block Set 8 D14

0.0.629.16

Visa CAD-data Tilldela till jämförelselista Jämför produkter https://se-product.item24.com/sv/directlink/pro/62916
Specialfunktioner:
item-produkter baseras på olika modulära dimensioner och tillhörande systemspår. Profiler från linjerna 5, 6, 8, 10 och 12 behöver motsvarande storlekar på fästena. Profilerna i linje X har ett systemspår för linje 8 men har en särskilt plan yta med minimal kurvradie som gör att de lämpar sig utmärkt för att förseglade konstruktioner.
Delar som överensstämmer med RoHS innehåller inga farliga substanser som bly eller kadmium. EU-direktiv 2002/95/EG (RoHS 1) begränsar användningen av vissa ämnen i elektroniska apparater och delar. Detta omfattar batterier och liknande.
Alla ämnen är registrerade i enlighet med REACH-förordningen. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ser till att användare har tillförlitlig information om typ av och egenskaper hos drivmedel, smörjmedel och liknande som de kan komma i kontakt med.
Leveransenhet
Gräns skala
Pris
1 set
≥1
on application

on application

Mer produktinformation

  • Attribut
  • Detaljer
  • Nedladdningar
  • Klassificering
Ball-Bush Block Set 8 D14
0.0.629.16

Attribut

Line
line 8
Delivery unit
1 set
Weight
m = 112 g
ESD
ESD-safe = No
Diameter
d = 14 mm
Velocity
vmax. = 2 m/s
Load Factor, dynamic
C = 620 N
Load Factor, static
C0 = 520 N
Ball-Bush Block Set 8 D14
0.0.629.16

Detaljer

1 Ball-Bush Block 8 D14, Al, anodized, natural
1 Block-Cap Set 8 D14, PA-GF, black
The application and characteristics of the modular ball-bush block guides are similar to those of the ball-bearing guide bushes. By separating the sliding carriage into two units, the distance between the points of support on the guides can be selected in accordance with the applied loads.
The special profiles of sizes 40x40 and 60x60 (with Line 8 grooves) accommodate both the shaft and the Ball Bushes.
The range of sizes and the different shaft diameters are designed to withstand applied loads ranging from 500 to 1500 N at a maximum travelling speed of 2 m/s. The Ball Bushes, which are sealed at both ends, and the high-quality grease filling ensure a long service life, even under difficult operating conditions.
It is advisable to carry out calculations to check the load-bearing capacity and service life and to make an allowance for the deflection of the guiding shafts in the case of longer strokes.
The Direct-Fastening Set is particularly suitable for connecting the profiles of the ball-bush block guides to other profiles, so that the profiles can be moved and no machining is required.
The Ball-Bush Blocks serve as the guide elements with integral press-fitted recirculating Ball Bushes.
Grooves of Profiles 8 can be used to secure the Bearing Blocks using fastening elements of Line 8.
Direct-Fastening Set 8 provides a particularly easy means of securing Bearing Blocks without need for machining.
An individual Ball Bush is unable to absorb any moment. It is therefore always necessary to use two shafts for a guide system, with at least two Ball Bushes being located one after the other on a single shaft.
The distances must be appropriate for the moment loads.
The blocks can be pinned in the areas marked (depending on requirements).

Nedladdningar

Assembly instruction(233 KB)
Ball-Bush Block Set 8 D14
0.0.629.16

Klassificeringar

Klassificeringar är industriövergripande datastandarder som används bland annat för stöd av strukturerad bearbetning i ERP- och e-business-system. Behöver du klassificeringsdata för alla item-produkter för ditt e-upphandlingssystem? Tveka inte att kontakta oss.
eCl@ss 11.0
23050702
eCl@ss 4.0
23050702
eCl@ss 4.1
23050702
eCl@ss 5.0
23050702
eCl@ss 5.1
23050702
eCl@ss 6.0.1
23050702
eCl@ss 7.1
23050702
eCl@ss 8.0
23050702
UNSPSC 7.0
31171506
UNSPSC 9.0
31171506
customs tariff number
83024200