Linear Unit KLE 6 60x60 LR
0.0.605.07

Linear Unit KLE 6 60x60 LR

0.0.605.07

Visa CAD-data Tilldela till jämförelselista Jämför produkter https://se-product.item24.com/sv/directlink/pro/60507
Specialfunktioner:
item-produkter baseras på olika modulära dimensioner och tillhörande systemspår. Profiler från linjerna 5, 6, 8, 10 och 12 behöver motsvarande storlekar på fästena. Profilerna i linje X har ett systemspår för linje 8 men har en särskilt plan yta med minimal kurvradie som gör att de lämpar sig utmärkt för att förseglade konstruktioner.
Delar som överensstämmer med RoHS innehåller inga farliga substanser som bly eller kadmium. EU-direktiv 2002/95/EG (RoHS 1) begränsar användningen av vissa ämnen i elektroniska apparater och delar. Detta omfattar batterier och liknande.
Alla ämnen är registrerade i enlighet med REACH-förordningen. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ser till att användare har tillförlitlig information om typ av och egenskaper hos drivmedel, smörjmedel och liknande som de kan komma i kontakt med.

Red Dot Design Award

The internationally acclaimed Red Dot Design Award acknowledges excellence in design. Formal quality, functionality and innovation are some of the criteria that mark out the excellent design quality of this product.

Mer produktinformation

  • Attribut
  • Detaljer
  • Tillbehör
  • Nedladdningar
  • Böjningskalkylator
  • Användning
  • Klassificering
Linear Unit KLE 6 60x60 LR
0.0.605.07

Attribut

Line
line 6
Delivery unit
1 pce.
Weight
m = 4.0740576 kg
Weight spec. length [g/mm]
m = 4.8887 g/mm
Weight, spec. Length
m = 4.8887 kg/m
ESD
ESD-safe = No
Safety clearance
smin = 26 mm
Stroke max.
Hmax = 5750 mm
Max. speed
Vmax = 10 m/s
Max. acceleration
amax  = 10 m/s2
Repeat accuracy
. = 0.1 mm
Stroke
h = 155 mm/U
Frictional moment
. = 1 Nm
max. drive torque
. = 12 Nm
Mass moment of inertia when stroke length = 0 mm
J0 = 705 kg mm2
Mass moment of inertia per m of stroke
JH = 100 kg mm2/m
Mass moment of inertia per kg of payload
JN = 608.6 kg mm2/kg
Basic mass (when stroke length = 0 mm)
m1 = 4.0740576 kg
Mass per mm of stroke
m2 = 4.8887 g/mm
Total mass
m = m1 + H * m2
Maximum operating load
Fx max = 500 N
Maximum force in direction y
Fy max = 750 N
Maximum force in direction z
Fz max = 500 N
Maximum moment around the x axis
Mx max = 20 Nm
Maximum moment around the y axis
My max = 50 Nm
Maximum moment around the z axis
Mz max = 75 Nm
Support width when Fz max.
.  = 1600 mm
Support width when Fy max.
.  = 1500 mm
Weight per length of the drive medium (timing belt, chain)
mlz = 0.082 kg/m
Efficiency
. = 1
Moment of Inertia, x-axis
Ix = 44.49 cm4
Moment of Inertia, y-axis
Iy = 57.11 cm4
Resistance Moment, x-axis
Wx = 13.11 cm3
Resistance Moment, y-axis
Wy = 19.04 cm3
Moment of Inertia, torsional
It = 6.64 cm4
Linear Unit KLE 6 60x60 LR
0.0.605.07

Detaljer

Note: The stated safety distances S apply for average operating conditions. Depending on the application (speed, load), other safety distances may be required.
To obtain a specific working stroke H, the total length L of a KLE can be derived from the following diagram:
L = 2 x B + 2 x S + LG + H
Complete Linear Units with variable stroke length (H), Drive Unit and Reverse Unit, Housing Profile with integrated roller guide on hardened guiding shafts, preset to be free of play. The Timing Belt in its guide grooves acts as a labyrinth seal, the Timing-Belt tensioning device is integrated into the Reverse Unit along with the ball-bearing mounted pulleys.
Guide slide with four-piece roller-bearing mounting, oil-lubricated roller contact (re-lubrication every 6 months or every 2500 km)
Linear Units KLE boast exceptional precision and low-vibration linear movement.
Simplified method for determining the maximum permissible load for the Roller Guides of a KLE:
The maximum deflection fmax of the system is governed by the dimension of the profile cross-section, the free profile length and the force applied.
It should not exceed 1mm/m.
The KLE profile must be given appropriate support if the linearity of movement has to be very precise.
The moments of inertia of the profiles provide the basis for calculating the deflection:
The formula for the calculation depends on the load scenario.
The carriage plate of the KLE 6 60x60 has two drilled holes used to pin the carriage plate to the cover plate on the carriage. The carriage plate and cover plate need to be pinned so that they can accommodate the relevant forces and ensure they are reliably transmitted to the roller guide.
Two ø4H7 pinning holes are provided in the KLE 6 60x60 cover plate for this purpose.
It is advisable to use the dowel pins supplied with the carriage set in combination with the carriage plates.
KLE 6 60x60: Dowel Pin ISO 2338 4h8x30
KLE 8 80x80: Dowel Pin ISO 2338 6h8x40
If not using the original carriage plates, the pattern of holes must be copied from the drawings and transferred onto the custom carriage constructions.
Maximum possible acceleration in relation to moved mass and installation orientation
h = horizontal orientation
v = vertical orientation
Travel speed v in relation to input speed n (timing-belt drive)
Operational force Fx dependent on input torque M (timing-belt drives Fx ≤ 500N)
Linear Unit KLE 6 60x60 LR
0.0.605.07

Tillbehör/service

item MotionSoft®
Leveransenhet
Artikel-nr
0.0.675.15
Track Oil for Linear Guides
Leveransenhet
1 pce.
Artikel-nr
0.0.612.75
Oil Can for Linear Guides
Leveransenhet
1 pce.
Artikel-nr
0.0.612.74
Cover Profile 6 LE, grey similar to RAL 7042
Leveransenhet
1 pce., length 2000 mm
Artikel-nr
0.0.603.88
Proximity Switch KLE 6 60x60 - 1NO
Leveransenhet
1 pce.
Artikel-nr
0.0.609.31
Snart tillgänglig
Proximity Switch KLE 6 60x60 - 1NC
Leveransenhet
1 pce.
Artikel-nr
0.0.604.41
Carriage Plate KLE 6 60x60
Leveransenhet
1 set
Artikel-nr
0.0.609.25
Drive Set KLE 6 60x60
Leveransenhet
1 set
Artikel-nr
0.0.609.80
Synchronising Set KLE 6 60x60
Leveransenhet
1 set
Artikel-nr
0.0.609.81
Tube D20x3 St, bright zinc-plated
Leveransenhet
cut-off max. 6000 mm
Artikel-nr
0.0.609.86
Synchroniser Shaft Cover Set KLE 6 60x60
Leveransenhet
1 set
Artikel-nr
0.0.612.46
Drive Set KLE 6 60x60 AP/WP 40
Leveransenhet
1 set
Artikel-nr
0.0.673.29
Drive Set KLE 6 60x60 AP/WP 60
Leveransenhet
1 set
Artikel-nr
0.0.673.28
Lid Profile D60 E, natural
Leveransenhet
cut-off max. 3000 mm
Artikel-nr
7.0.002.87
Conduit Profile U 60x60 E, natural
Leveransenhet
cut-off max. 3000 mm
Artikel-nr
7.0.002.91
Transverse Carriage Plate KLE 6 60x60
Leveransenhet
1 set
Artikel-nr
0.0.692.19

Nedladdningar

request(594 KB)
Assembly instruction(2 MB)

Böjningskalkylator

För att fastställa profilens böjning runt Y-axeln ska du ange

I beräkningen tas redan hänsyn till den böjning som orsakas av dödvikten.

Last 1

load 1
Böjning f1x: 0 mm Böjspänning σ1x: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.
Böjning f1y: 0 mm Böjspänning σ1y: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.

Last 2

load 2
Böjning f2x: 0 mm Böjspänning σ2x: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.
Böjning f2y tillfällig: 0 mm Böjspänning σ2y: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.

Last 3

load 3
Böjning f3x: 0 mm Böjspänning σ3x: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.
Böjning f3y tillfällig: 0 mm Böjspänning σ3y: 0 N/mm² Varning! Böjspänningen överskrider materialets sträckgräns.

Applikationer

Space-saving positioning system - Article EX-01008

This two-axis positioning system takes up very little space.

Mer information
PDF CAD Dellista

Applikationer

Machine frame with 3-axis handling - Article EX-01072

This stable machine frame is held together by Angle Brackets and stands firm even when subjected to frequent and rapid movements in three spatial directions.

Mer information
PDF CAD Dellista Ritning

Applikationer

3-axis handling - Article EX-01078

item linear technology can be used to design highly accurate 3-axis handling systems. Movement along the X axis is controlled by two synchronised KLE 8. Movement along the Y axis is controlled by roller guide 8 D10 with timing-belt drive, while roller guide 8 D14 with timing-belt drive takes care of the Z axis.

Mer information
PDF CAD Dellista Ritning
Linear Unit KLE 6 60x60 LR
0.0.605.07

Klassificeringar

Klassificeringar är industriövergripande datastandarder som används bland annat för stöd av strukturerad bearbetning i ERP- och e-business-system. Behöver du klassificeringsdata för alla item-produkter för ditt e-upphandlingssystem? Tveka inte att kontakta oss.
eCl@ss 11.0
23301702
eCl@ss 4.0
36400806
eCl@ss 4.1
36400701
eCl@ss 5.0
23329090
eCl@ss 5.1
23329090
eCl@ss 6.0.1
23301702
eCl@ss 7.1
23301702
eCl@ss 8.0
23301702
UNSPSC 7.0
26111506
UNSPSC 9.0
26111506
customs tariff number
84879090