Chain Reverse Unit 8 80 with Bore
0.0.463.75

Chain Reverse Unit 8 80 with Bore

0.0.463.75

Visa CAD-data Tilldela till jämförelselista Jämför produkter https://se-product.item24.com/sv/directlink/pro/46375
Specialfunktioner:
item-produkter baseras på olika modulära dimensioner och tillhörande systemspår. Profiler från linjerna 5, 6, 8, 10 och 12 behöver motsvarande storlekar på fästena. Profilerna i linje X har ett systemspår för linje 8 men har en särskilt plan yta med minimal kurvradie som gör att de lämpar sig utmärkt för att förseglade konstruktioner.
Delar som överensstämmer med RoHS innehåller inga farliga substanser som bly eller kadmium. EU-direktiv 2002/95/EG (RoHS 1) begränsar användningen av vissa ämnen i elektroniska apparater och delar. Detta omfattar batterier och liknande.
Alla ämnen är registrerade i enlighet med REACH-förordningen. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ser till att användare har tillförlitlig information om typ av och egenskaper hos drivmedel, smörjmedel och liknande som de kan komma i kontakt med.
Leveransenhet
Gräns skala
Pris
1 pce.
≥1
on application

on application

Mer produktinformation

  • Attribut
  • Detaljer
  • Nedladdningar
  • Klassificering
Chain Reverse Unit 8 80 with Bore
0.0.463.75

Attribut

Line
line 8
Delivery unit
1 pce.
Weight
m = 1.1 kg
ESD
ESD-safe = No
Torque max.
Mmax. = 20 Nm
Chain Reverse Unit 8 80 with Bore
0.0.463.75

Detaljer

Chain Reverse Unit, die-cast zinc, black, pre-assembled
Ball-bearing sprocket wheel, z = 16 (z = number of teeth)
One revolution corresponds to 203.2 mm
effective radius rw = 32.3 mm
Hub with bore D8, reborable up to max. ø 15 mm
Hub depth 30 mm, Max. load: MD = 20 Nm
Tensioning Block, die-cast zinc, black, pre-assembled
Fastening screws, St, black, 2 caps, PA, black
Chain length in Reverse Unit 236.3 mm
Notes on Use and Installation
Chain Reverse Units 8 80 are used for reversing, clamping and driving Chain ½".
They are screwed into the end faces of Profiles 8 at a height of 80 mm.
It is possible to fit motors and couplings D55 directly to the Chain Reverse Unit.
The Chain Reverse Unit incorporates integrated chain tensioning block and clamp.
The Chain tensioning distance is 2x13 mm in total. The Chain tension must be set so that the Chain can also be operated with the slack side of the Chain only slightly pre-tensioned.
The Chain can be driven directly using the Chain Reverse Units or the Chain Counter-Reverse Unit. The sprocket wheels of the Chain Reverse Units are available with multi-spline hub VK14 or with a bore that can be machined as required. Use of multi-spline hub VK14 enables the modular accessories (Synchroniser Shafts) to be used without any restrictions.
The Chain Reverse Units are screw-connected into the core bores in the end faces of the frame profiles.
The Chain Guide Profile must be cut 50 mm longer than the aluminium profile, since it must project 25 mm into the Reverse Unit at each end.
Calculating the chain length:
Chain drive with two Chain Reverse Units 8 80

Nedladdningar

Assembly instruction(618 KB)
Chain Reverse Unit 8 80 with Bore
0.0.463.75

Klassificeringar

Klassificeringar är industriövergripande datastandarder som används bland annat för stöd av strukturerad bearbetning i ERP- och e-business-system. Behöver du klassificeringsdata för alla item-produkter för ditt e-upphandlingssystem? Tveka inte att kontakta oss.
eCl@ss 11.0
23170490
eCl@ss 4.0
23170705
eCl@ss 4.1
23170705
eCl@ss 5.0
23179105
eCl@ss 5.1
23179105
eCl@ss 6.0.1
23179105
eCl@ss 7.1
23179105
eCl@ss 8.0
23179105
UNSPSC 7.0
26111505
UNSPSC 9.0
26111505
customs tariff number
84833080