Bearing Carriage PS 4-15
0.0.443.06

Bearing Carriage PS 4-15

0.0.443.06

Visa CAD-data Tilldela till jämförelselista Jämför produkter https://se-product.item24.com/sv/directlink/pro/44306
Specialfunktioner:
item-produkter baseras på olika modulära dimensioner och tillhörande systemspår. Profiler från linjerna 5, 6, 8, 10 och 12 behöver motsvarande storlekar på fästena. Profilerna i linje X har ett systemspår för linje 8 men har en särskilt plan yta med minimal kurvradie som gör att de lämpar sig utmärkt för att förseglade konstruktioner.
Delar som överensstämmer med RoHS innehåller inga farliga substanser som bly eller kadmium. EU-direktiv 2002/95/EG (RoHS 1) begränsar användningen av vissa ämnen i elektroniska apparater och delar. Detta omfattar batterier och liknande.
Alla ämnen är registrerade i enlighet med REACH-förordningen. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ser till att användare har tillförlitlig information om typ av och egenskaper hos drivmedel, smörjmedel och liknande som de kan komma i kontakt med.
Leveransenhet
Gräns skala
Pris
1 pce.
≥1
on application

on application

Mer produktinformation

  • Attribut
  • Detaljer
  • Tillbehör
  • Nedladdningar
  • Klassificering
Bearing Carriage PS 4-15
0.0.443.06

Attribut

Line
line 8
Delivery unit
1 pce.
Weight
m = 140 g
ESD
ESD-safe = No
Velocity
vmax. = 5 m/s
Load Factor, dynamic
C = 7200 N
Load Factor, static
C0 = 14500 N
Bearing Carriage PS 4-15
0.0.443.06

Detaljer

Housing, St, hardened
2 wipers, PA, black
2 lubricating nipples
Notes on Use and Installation
The Bearing Carriages can be used either individually or in various combinations on one or more rails.
The Bearing Carriage has four polished tracks on which the bearings are in linear rolling-ball contact with the profiled rail. The bearings are recirculated through the end-face reverse units and closed return conduits. The carriages are fitted with end-face wipers and additional longitudinal wipers in order to minimise sensitivity to external influences.
Profiles 8 can be secured to the Bearing Carriage by means of Button-Head Screws ISO 7380 and Locating Washers 8 (Section 3.2 Screws and Universal- Elements).
Guide rail PS 4-15 is attached to the Profile 8 groove. The rail has been shaped for this purpose and centres automatically when screwed against Groove Profile 8 Al M4-60.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.
*Note: Due to the fixing of the guide rail, the stated tensile forces of the linear guide system cannot be fully utilised in all directions.
*Note: Due to the fixing of the guide rail, the stated tensile forces of the linear guide system cannot be fully utilised in all directions.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.
Bearing Carriage PS 4-15
0.0.443.06

Tillbehör/service

Linear Guide Rail PS 4-15
Leveransenhet
cut-off max. 1900 mm
Artikel-nr
0.0.443.32
Groove Profile 8 Al M4-60, natural
Leveransenhet
1 pce., length 2000 mm
Artikel-nr
0.0.443.02

Nedladdningar

Assembly instruction(1 MB)
Bearing Carriage PS 4-15
0.0.443.06

Klassificeringar

Klassificeringar är industriövergripande datastandarder som används bland annat för stöd av strukturerad bearbetning i ERP- och e-business-system. Behöver du klassificeringsdata för alla item-produkter för ditt e-upphandlingssystem? Tveka inte att kontakta oss.
eCl@ss 11.0
23050701
eCl@ss 4.0
23050701
eCl@ss 4.1
23050701
eCl@ss 5.0
23050701
eCl@ss 5.1
23050701
eCl@ss 6.0.1
23050701
eCl@ss 7.1
23050701
eCl@ss 8.0
23050701
UNSPSC 7.0
31171506
UNSPSC 9.0
31171506
customs tariff number
84829900